Filter
Top Products
January 30, 2002 8:52 am Page 6
— 6 —
Master Page: Right
D
Perform Plug&Play setup
Plug the mains power cord into a mains
outlet. Do not turn on the recorder. The
Country Set screen appears.
Press w e to select your country, then
press OK. The recorder automatically
assigns all receivable stations in your
area.
NOTE:
If you have connected your TV to the recorder with RF connection
and the on-screen display appearing on UHF channel 36 looks
distorted, perform “Video Channel Set” on the right column.
● When Plug&Play is completed, the Confirmation screen
appears.
E
Return to normal screen
Press MENU.
Video Channel Set
Video channel (RF output channel) is the channel on which your
TV receives picture and sound signals from the recorder through
the RF cable.
Perform the following steps only if interference appears in the TV
picture after you have moved to a different area or a new station
has started broadcasting in your area, or if you change the
connection from RF connection to AV connection, or vice versa.
If you have connected the recorder to your TV via the AV
connection, set the video channel to off.
If you have connected the recorder to your TV via the RF
connection, set the correct video channel.
A
Set the channel on TV
Select the vacant position 36 on your TV.
B
Access Video Channel Set mode
Press 1 on the remote control to enter the standby mode. Press
and hold PR+ or
–
on the recorder for more than 3 seconds.
C
Set video channel
With AV connection
Press PR + or – to set the video channel to
“OFF”. Then press 1.
With RF connection
Press PR + or – to set the video channel to
a vacant position between 22 and 68
which is not occupied by any local station
in your area. Then press 1.
The TV should be set to its AV mode (with AV connection
੬
5)
or UHF channel 36 (with RF connection
੬
5).
A : Austria I : Italy
B : Belgium N : Norway
CH : Switzerland NL : Netherlands
D : Germany P : Portugal
DK : Denmark S : Sweden
E : Spain SF : Finland
F : France OTHERS : Other countries
Initial Settings
Turn on the recorder and TV.
With AV connection
To view picture signals from the recorder, set your TV to its AV
mode.
With RF connection
To view picture signals from the recorder, set your TV to the
video channel.
HR-J585_285EU-001EN.fm Page 6 Wednesday, January 30, 2002 8:54 AM