Filter
Top Products
36 EN
2
2
q
5
/
8
6
EDITING (cont.)
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set to AUX.
ACCESS MAIN MENU
SCREEN
4
Press MENU.
ACCESS FUNCTION SET
SCREEN
5
Press CH5
∞
to move the highlight bar (arrow) to
“FUNCTION SET”, then press OK.
If you’re using a JVC Master Edit Control-equipped
camcorder — step 6
If not — step 9
ACCESS SPECIAL
FUNCTION SCREEN
6
Press CH5
∞
to move the highlight bar (arrow) to
“SPECIAL FUNCTION”, then press OK.
SELECT MODE
7
Press CH5
∞
to move the
highlight bar (arrow) to
“PAUSE”.
● Make sure the VCR is in
the Stop mode before
you change the setting.
Recorder Your VCR
To rear panel PAUSE/
AV COMPU LINK connector
Mini-plug cable (not supplied)
(JVC camcorder only)
Audio/Video cable
(not supplied)
Player
EDIT
AUDIO OUT
VIDEO
OUT
AUDIO IN
VIDEO
IN
Camcorder
3
¶7
8
1¡
1
2
3
4
5
6
7
8
0
9
NUMBER "0"
CH
MENU
OK
SPECIAL FUNCTION
=PAUSE
AV COMPU-LINK
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END