JVC HR-J648EH, HR-J648E, HR-J448E, HR-J248E VCR User Manual


 
EN 17
1
7
3
8
¡
123
456
7
/
8
0
9
4
2
1
3
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
RECORDING
Basic
Recording
q
¢
¢
1
¡
Turn on the TV and select the VIDEO channel (or AV mode).
RECORD
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG. +/– or the NUMBER keys to select the
channel you wish to record.
SET TAPE SPEED (HR-J648E/
J648EH/J448E ONLY)
3
Press SP/LP ( ). Check the SP/LP indicator on the
recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
With HR-J648E/J648EH/J448E:
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (
pg. 18).
With HR-J248E:
B.E.S.T. takes place at the beginning of the first
recording after inserting the cassette ( pg. 18).
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
Accidental erasure prevention
TV PROG.
PLAY
STOP/EJECT
PAUSE
SP/LP
TV PROG.
NUMBER
PLAY
PAUSE
STOP
RECORD