Filter
Top Products
Filename [HR-J770EU1.fm]
Masterpage:Right
EN
5
FRONT DISPLAY PANEL
A
B.E.S.T. Picture System Display
੬
pg. 23
B
Symbolic Mode Indicators
C
Tape Speed Indicators
੬
pg. 20
* EP is for NTSC playback only.
D
Programme Time Indicators
੬
pg. 26
E
“Timer” Indicator
੬
pg. 25, 27
F
Tape Remaining Time Indicator
੬
pg. 22
G
Channel/Clock Display
੬
pg. 11
H
Instant REVIEW Indicator
੬
pg. 18
I
VPS/PDC Indicator
੬
pg. 25, 27
J
VCR Indicator
੬
pg. 21
K
“Cassette Loaded” Mark
L
Counter/Remain Display
M
Mode Display (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 39), “SAT” appears
instead of “L-2”.
PLAY:
FF/REW VARIABLE
SEARCH:
u
STILL:
SLOW:
ui
RECORD:
o
RECORD
PAUSE:
oi
ON-SCREEN DISPLAY
When “O.S.D.” is set to “ON” (
੬
pg. 37), various
operational indicators appear on the TV screen.
A
Operation mode indicators
B
Tape speed SP/LP/EP
* EP is for NTSC playback only.
C
Tape direction
D
Counter display
E
Tape remaining time indicator
੬
pg. 22
F
Audio mode display
੬
pg. 19
G
Tape position indicator
The tape position indicator
appears on the TV screen
when you press
3 or
5 from the Stop mode
or perform an Index Search
(
੬
pg. 19). The position of
“
q” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape used, the tape position
indicator may not appear correctly.
H
Type of broadcast
੬
pg. 22
I
Current day/month/year
J
Clock display
K
Channel position number and station name/
Auxiliary input indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 39), “SAT” appears
instead of “L-2”.
L
Timer warning display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time.The warning blinks for the entire 5 minutes
leading up to the start of timer recording. To clear the display,
press
&.
M
Cassette loaded mark
Beginning End
HRJ670EU1.fm Page 5 Thursday, January 13, 2000 2:24 PM