Filter
Top Products
basic features26
24H Express Timer
Programming
You can program a timer recording that starts within 24 hours using the 24H
EXPRESS
c button and the Advanced JOG Dial on the VCR.
enter program mode Press the 24H
EXPRESS
c button on the VCR. The
Programme Start Time indicator starts blinking
on the display panel.
set start time Turn the JOG Dial to the right
or left. One click stop of the
JOG Dial changes
the time in 5-minute intervals.
set stop time Push the center part of the JOG
Dial
. The Programme Stop Time indicator starts
blinking on the display panel. Turn the
JOG Dial
to the right or left.
set preset position Push the center part of
the
JOG Dial. Turn the JOG Dial to the right or
left.
engage timer mode Press the 24H EXPRESS c button on the VCR. The VCR
turns off automatically and
c is displayed on the display panel.
• Before pressing the
24H EXPRESS c button to engage the timer mode, you
can cancel the setting at anytime by pressing the center part of the
JOG Dial for
more than 3seconds. Repeat the above steps from setting the start time.
• To disengage the Timer Mode, press cor 24H EXPRESS c.
Notes
• You can set this VCR to timer record up to eight programmes. If you try to
enter a ninth,
FULL appears on the display panel.
• If
Err appears on the display panel, repeat the above steps again.
• When a menu screen is shown, you cannot use the 24H Express Timer
Programming function. Press
mto return to normal screen, and try again.
• You can use the 24H Express Timer Programming function also when the
VCR is turned off.
before you start
Set the tape speed
Make sure that the
VCR’s clock is set
correctly
Insert a cassette with
the safety tab in place
VCR
SAT
REVIEW
VCR
SAT
REVIEW
VCR
SAT
REVIEW
VCR
SAT
REVIEW
HR-J795EK-EN/p21-28 5/28/02, 11:36 AM26