Filter
Top Products
advanced features30
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will
be adequate for most tapes and will automatically adjust the
tracking to suit the particular tape in use but if you insert an old
or worn tape, it may be necessary to manually adjust the track-
ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear-
ing across the picture; you can correct this by manually overriding the tracking using the follow-
ing steps.
override automatic tracking During playback, press / on the Remote Control to
engage manual tracking.
adjust tracking manually Use the PR + or – buttons to adjust the tracking manually.
NOTES:
• Press / again to re-engage automatic tracking.
• When a new tape is inserted, the VCR returns to automatic tracking.
Picture Control
This feature allows you to select the most appropriate picture quality according to the type of
tape or use of this VCR. The default setting is
AUTO.
get to the mode set screen Press m. Move the highlight bar to MODE SET using the
A and B buttons and press (or E).
select picture control mode Move the highlight bar to PICTURE CONTROL using the A
and B buttons. Press (or E) to select the desired mode:
•
AUTO (NORM) Provides optimised picture benefits of
B.E.S.T. Picture System. When
B.E.S.T. is OFF, PICTURE
CONTROL
switches automatically from AUTO to NORM.
•
EDIT Minimizes picture degradation during editing (record-
ing or playback).
•
SOFT Reduces image coarseness when viewing overplayed
tapes containing lots of noise.
•
SHARP Clearer, sharper-edged picture when viewing images
with lots of flat, same-coloured surfaces such as cartoons.
return to normal screen Press m.
O
K
3
/
O
K
3
/
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE ON
AUTO POWER OFF
F
HR-J795EK-EN/p29-42 5/28/02, 11:37 AM30