Filter
Top Products
Masterpage:Right
EN
45
Filename [HRJ870EU3.fm]
Page 45 July 11, 2000 6:41 pm
EDITING
Edit From A
Camcorder
You can use a camcorder as the source player and your
recorder as the recording deck.
A
Make connections.
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
● When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the recorder. Refer to
the camcorder’s instruction manual for operating procedure.
B
Set the recorder’s input mode.
Press
AUX
(
number key
“
0
”) and/or
PR
to select “F-1”.
C
Set the edit mode.
See “PICTURE CONTROL” on page 57.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step
3
, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Recorder
AUDIO OUT
VIDEO OUT
Camcorder
AUDIO
input
Player
VIDEO
input
EDIT
Video cable (not provided)
Mini-plug cable
(not provided)
(JVC camcorder
only)
To rear panel
PAUSE connector
Audio cable (not provided)
HRJ870EU3.fm Page 45 Tuesday, July 11, 2000 6:41 PM