JVC HR-P55A VCR User Manual


 
April 9, 2002 2:16 pm Page 5
5
Master Page: Right
Main Menu
You can perform various operations or change various mode
settings on the Main Menu Screen.
Turn on the player and the TV, and set your TV to its AV mode or
video channel.
The procedure shows how to set OSD to ON.
A
Access Main Menu screen
Press MENU. Press w e to select the icon
OSD, then press OK.
B
Change setting
Press w e to set to ON, then press OK.
C
Return to normal screen
Press MENU.
*The default setting is
bold
in the following table.
OSD
Icon Description
A
OSD ON / OFF
When this function is set to ON, various
player status information (on-screen display)
appears on the screen.
B
EPC OFF / SOFT / SHARP
This function helps you to adjust the playback
picture quality according to your preference.
OFF
: Picture quality is not adjusted.
SOFT
: Reduces image coarseness when viewing
overplayed tapes containing much noise.
SHARP
: Clearer, sharper-edged picture when
viewing images with much flat, same-coloured
surfaces such as cartoons.
NOTES:
You can perform EPC setting only during
playback.
You can also perform EPC setting by pressing
EASY PICTURE CONTROL
on the player or
on the remote control.
C
REPEAT ON / OFF
If you want to play back a tape repeatedly, set
REPEAT to ON. For details, refer to Repeat
playback (
8).
D
VCR
INFO
This function allows you to check the status of
the player and tape inserted into the player. For
details, refer to Players information (Self-
Diagnosis) (
11).
E
ABC OSD
Select this icon to set the language. You can
select among 2 languages. For details, refer to
Language Set (
7).
F
SYSTEM AUTO / PAL / MESECAM / NTSC-PB /
NTSC3.58 / NTSC4.43
Select the appropriate colour system when you
play back or recording a tape. For details, refer
to Colour System Set (
11).
HR-p55_56A-001EN.fm Page 5 Tuesday, April 9, 2002 2:16 PM