Filter
Top Products
advanced features28
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will
be adequate for most tapes and will automatically adjust the
tracking to suit the particular tape in use but if you insert an old
or worn tape, it may be necessary to manually adjust the track-
ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear-
ing across the picture; you can correct this by manually overriding the tracking using the follow-
ing steps.
override automatic tracking During playback, press / on the Remote Control to
engage manual tracking.
adjust tracking manually Use the PR or buttons to adjust the tracking manually.
NOTES:
• Press / again to re-engage automatic tracking.
• When a new tape is inserted, the VCR returns to automatic tracking.
Video Stabilizer
You can automatically correct vertical vibrations in the picture when playing back unstable
recordings made on another VCR. The default setting is
OFF.
get to the mode set screen Press . Move the highlight bar to MODE SET using the
PR
and
PR
buttons and press (or E).
select video stabilizer mode Move the highlight bar to
VIDEO STABILIZER using the
PR
and
PR
buttons. Press (or
E) to set to
ON.
return to normal screen Press .
NOTES:
• When you finish viewing a tape, be sure to set this function
to
OFF.
• Regardless of the setting, this function has no effect during
recording and during special effects playback.
• The on-screen display may jitter vertically when this function is set to
ON.
• To watch recordings with close-caption, set this function to
OFF.
[1] a k
[MENU]: EXIT
MODE SET
PREVIOUS PAGE
VIDEO STABILIZER OFF
S-VHS ON
AUTO POWER OFF OFF
F
+ –
HR-S5965/5966EK-EN/p27-40 2/19/03, 04:10 PM28