Filter
Top Products
EN 37
JOG
SHUTTLE
–+
POWER MENU
CH
DIGITAL TBC/NR
0
4
1
3
TIME SCAN
Digital TBC/NR
Your VCR is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this VCR as the player for editing.
SELECT DIGITAL TBC/NR
SET MODE
1
Press DIGITAL TBC/NR so that the button lights up.
● Pressing the button again turns off this function.
NOTES:
●
If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with Digital TBC/NR set to off.
●
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
●
Digital TBC/NR and Video Stabilizer (
੬
pg. 26) cannot be
used at the same time; if you turn on Digital TBC/NR when
"VIDEO STABILIZER" is set to "ON", Video Stabilizer will be
automatically turned "OFF". Make sure Digital TBC/NR is off
when you want to use Video Stabilizer.
Digital R3
Digital R3 picture system applies edge correction to the luminance
signal to enhance detail.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Press CH5∞ or TIME
SCAN %fi to move the
highlight bar (arrow) to
"FUNCTION SET", then
press OK or TIME SCAN
#
.
SELECT DIGITAL R3 SET
MODE
3
Press CH 5∞ or TIME
SCAN %fi to move the
highlight bar (arrow) to
"DIGITAL R3", then press
OK or TIME SCAN
#
to set
to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
=FUNCTION SET
TUNER SET
INITIAL SET
HI-FI REC LEVEL CTL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
NOTES:
●
Normally it is recommendable to keep "DIGITAL R3" set to
"ON".
●
Depending on the type of tape being used, picture quality
may be better with "DIGITAL R3" set to "OFF".
●
If you use this VCR as the player for editing, be sure to set
"DIGITAL R3" to "OFF" before starting.
FUNCTION
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
=DIGITAL R3 ON
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
MENU
OK
OK
MENU