Filter
Top Products
56 EN
JOG
SHUTTLE
–+
POWER MENU
0
4
1
3
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while editing.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT MODE
3
Set to "AUX". Press the NUMBER key “0” and/or CH to
select depending on the connector being used – "L-1"
for the rear AUDIO/VIDEO IN connector, or "F-1" for
the front AUDIO/VIDEO IN connector.
If you have connected a JVC Master Edit Control-
equipped camcorder to...
... the VCR's rear panel S-VIDEO IN and AUDIO IN
connectors — step 4
... the VCR's rear panel VIDEO IN and AUDIO IN
connectors — step 4
... the VCR's front panel VIDEO IN and AUDIO IN
connectors — step 8
If you are not using a JVC Master Edit Control-equipped
camcorder — step 12
ACCESS MAIN MENU SCREEN
4
Press MENU.
ACCESS FUNCTION SET SCREEN
5
Press CH
5
∞
or TIME SCAN
%
fi
to move the highlight
bar (arrow) to “FUNCTION SET”, then press OK or
TIME SCAN
#
.
SELECT REAR AUX INPUT SET
MODE
6
a– S-VHS IN: Move the highlight bar (arrow) to
"REAR AUX INPUT" by pressing CH
5
∞
or
TIME SCAN
%
fi
, then press OK or TIME SCAN
#
to set to "S-VIDEO".
b– REAR VIDEO: Move the highlight bar (arrow) to
"REAR AUX INPUT" by pressing CH
5
∞
or
TIME SCAN
%
fi
, then press OK or TIME SCAN
#
to set to "VIDEO".
NUMBER "0"
Recorder
Your VCR
To rear panel
REMOTE PAUSE/AV
COMPULINK
connector
Mini-plug cable
(not supplied)
(JVC camcorder
only)
Audio/Video
cable
(supplied)
Camcorder
VIDEO OUT
AUDIO
OUT
EDIT
VIDEO
IN
AUDIO
IN
JOG
SHUTTLE
–+
POWER MENU
OK
MENU
TIME SCAN
S-VIDEO
IN
S-VIDEO
OUT
S-VIDEO
cable
(supplied)
Player
PREVIOUS PAGE
AUDIO MONITOR HI-FI
S-VHS MODE ON
AV COMPU-LINK ON
VIDEO CALIBRATION ON
TIMESCAN AUDIO ON
=REAR AUX INPUT VIDEO
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
FUNCTION
=AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
DIGITAL R3 ON
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
MENU
OK
CH
EDITING (cont.)