Filter
Top Products
EN 5
AV1 IN/OUT
AV2 IN/DECODER
AV1 OUT
COMP. Y/C
ANT. IN
RF OUT
S OUT
PAUSE
R
L
AUDIO
OUT
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the recorder's
front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to
page 6 to perform Auto Set Up.
CONNECT RECORDER TO
TV
1
a– Connect the aerial, recorder and TV as per "RF
CONNECTION" (੬ pg. 4).
b– Connect the recorder's S-VIDEO OUT connector to
the TV's S-VIDEO IN connector.
c– Connect the recorder's AUDIO OUT connectors to
the TV's AUDIO IN connectors.
CONNECT RECORDER TO
MAINS
2
Plug the end of the mains power cord into a mains
outlet.
●
To Connect to A TV With S-VIDEO/AUDIO IN Connectors . . .
S-VIDEO Connection
Mains outlet
Mains Power Cord
AUDIO OUT
ANT. IN
Back of Recorder
RF OUT
Aerial or Cable
RF Cable (provided)
Back of TV
S-Video cable (not provided)
Audio cable (not provided)
S-VIDEO OUT
NOTES:
●
You can obtain high-quality S-VHS pictures.
●
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
੬
pg. 47)
●
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
●
For switching the TV's mode, refer to the instruction manual
of your television.
AUDIO IN
connectors
S-VIDEO IN
connector
Aerial terminal