Filename [HRS7950EU2-EN.fm]
Masterpage:Left
28
EN
Page 28 March 6, 2002 1:49 pm
TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
A
Access the S
HOW
V
IEW
screen.
The front display panel looks like this:
B
Enter the S
HOW
V
IEW
number.
The S
HOW
V
IEW
number you enter appears on the front display
panel with only a 4-digit number:
C
Access the S
HOW
V
IEW
Program screen.
The front display panel shows the programme number. Pressing
"
changes the display to the programme start time, the stop
time, the date, the tape speed then the channel position.
● If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
&
and input a valid S
HOW
V
IEW
number.
● If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 29.
Before performing the S
HOW
V
IEW
Timer
Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the video channel (or AV mode).
Press
PROG
.
Press the
number keys
to
enter the S
HOW
V
IEW
number
of a programme you wish to
record.
● If you make a mistake, press &
and input the correct number.
Press
OK
and the S
HOW
V
IEW
Program screen appears (if
you’re just starting out, “P1”
appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW
V
IEW
®
System Setup” on page 53
and set the Guide Program number correctly.
HRS7950EU1-EN.book Page 28 Wednesday, March 6, 2002 1:49 PM