JVC HR-S8850EU VCR User Manual


 
Masterpage:Right-NoTitle0
EN
11
Filename [HRS8850EU1.fm]
Page 11 April 17, 2001 5:00 pm
S-VIDEO Connection
8
To connect to a TV with S-VIDEO/AUDIO IN
connectors . . .
A
Connect the recorder to TV.
A
Connect the aerial, recorder and TV as per “RF
Connection” (
pg. 10).
B
Connect the recorder’s S VIDEO OUT connector to
the TV’s S-VIDEO IN connector.
C
Connect the recorder’s AUDIO OUT connectors to the
TV’s AUDIO IN connectors.
B
Connect the recorder to mains.
Plug the end of the mains power cord into a mains outlet.
NOTES:
You can obtain high-quality S-VHS pictures.
With S-VIDEO connection, you cannot use the Preset
Download function (
pg. 14).
If your TV is not stereo-capable, use the recorder’s AUDIO
OUT connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction. (
pg. 57)
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to its AV mode.
For switching the TV’s mode, refer to the instruction manual of
your television.
Back of TV
Aerial connector
S-VIDEO IN
connector
AUDIO IN connectors
S-Video cable
(not provided)
Audio cable
(not provided)
Mains outlet
Mains
power cord
Back of recorder
RF cable (provided)
S VIDEO OUT
AUDIO OUT
TV aerial cable
After the connection is completed, perform “Auto Set
Up” on page 12.
HRS8850EU1.fm Page 11 Tuesday, April 17, 2001 5:04 PM