Filter
Top Products
13
ATTENTION
● The operations by JOG dial/SHUTTLE ring do not include
TimeScan (੬ pg. 26).
● In the high-speed search, still, slow-motion or frame-by-
frame playback mode,
● the picture will be distorted.
● noise bars will appear.
● there will be a loss of colour with a tape recorded in LP
mode.
● Picture may not appear during high-speed search with a
tape recorded in LP mode.
● When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may
jitter vertically momentarily depending on the type of TV
being used.
Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
During playback or still, turn the SHUTTLE ring to the
right for forward slow motion, or to the left for reverse
slow motion (refer to the illustration to the left).
OR
During still picture, press and hold PAUSE for 2
seconds, then release. Press and release again to return
to still picture.
OR
During still picture, press and hold
@
or
#
. Release to
return to still picture.
To resume normal playback, press PLAY.
NOTE:
For Time Jog, see page 27.
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search. Releasing
SHUTTLE resumes still picture playback.
OR
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW during playback or
still picture. When released, normal playback resumes.
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE.
● During still picture, the sound from the previous
3 seconds (approx.) will be played back repeatedly
(provided there was at least 6 seconds of normal
playback prior to engaging the still picture mode).
● "TIME SCAN AUDIO" must be set to "ON", or the
sound will not be heard. (੬ pg. 27)
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2
Turn the JOG dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.
OR
Press PAUSE.
OR
Press
@
or
#
.
To resume normal playback, press PLAY.
R
e
v
e
r
s
e
R
e
v
e
r
s
e
R
e
v
e
r
s
e
S
l
o
w
P
l
a
y
F
o
r
w
a
r
d
s
e
a
r
c
h
p
l
a
y
s
l
o
w
m
o
t
i
o
n
s
e
a
r
c
h
Still
8
NOTES:
●
Refer to the SHUTTLE ring illustration above as you read the
following procedures.
●
Reverse playback is possible only with a tape recorded in SP
mode.
Variable-Speed Search
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration
above).
To resume normal playback, press PLAY.
NOTE:
Variable-speed search with TimeScan (
੬
pg. 26) can be used
by pressing the remote control's
@
or
#
button.