Filter
Top Products
69
DISPLAY PANEL
1 B.E.S.T. Picture System Display lights from
bottom to top while B.E.S.T. is active. ੬ pg. 22
Audio Level Indicator displays audio input and
output levels. ੬ pg. 28
2 Programme Time Indicators show the
programme start time ( ) and the programme
stop time ( ) for timer-recording. ੬ pg. 18
3 Symbolic Mode Indicators
4 "Timer" Indicator lights when ‰TIMER (or ‰
on remote control) has been pressed to engage
Timer mode. ੬ pg. 17, 19
5 S-VHS Indicator lights when a cassette marked
S-VHS is inserted with S-VHS mode set to
"AUTO", and when an S-VHS-recorded tape is
played back. ੬ pg. 21
6 Channel Display shows preset position where
the station currently being received is stored.
Clock Display shows current time. ੬ pg. 10
REVIEW
SP
VPS/PDC
+
8
4
0
6
15dB
NORM
@
!0
$
%9
1 5 6 873 42
VCR
#
STILL:
SLOW:
RECORD:
RECORD PAUSE:
PLAY:
FF/REW VARIABLE
SEARCH:
AUDIO DUBBING:
AUDIO DUBBING PAUSE:
INSERT:
INSERT PAUSE:
AUDIO DUBBING INSERT:
AUDIO DUBBING INSERT PAUSE:
7 Tape Speed Indicators display mode of record-
ing; light during Record or Play mode. ੬ pg. 14
*
EP is only for NTSC playback.
8 Instant REVIEW Indicator blinks after timer-
recording and shows how many programmes
have been timer-recorded. ੬ pg. 25
9 Audio Mode Indicator displays audio output
mode currently selected. ੬ pg. 29
0 Tape Remaining Time Indicator displays time
remaining on tape when certain buttons are
pressed. ੬ pg. 15
! "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
@ PDC Indicator lights when PDC has been
engaged for timer recording. ੬ pg. 17, 19
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
# VCR Indicator lights when the video recorder is
in the video mode. At this point, the TV auto-
matically enters AV mode. ੬ pg. 12
$ Counter shows time elapsed since playback or
recording began.
With displayed, shows time remaining from
current tape position to end of tape (੬ pg. 15).
Counter, Preset Position*, Clock and Tape
Remaining Time Display appear alternately
when DISPLAY (or – –:– – on remote control) is
pressed.
* Preset Position is not displayed during playback.
% Mode shows external input mode selected (L-1,
L-2, F-1 or S-1).