Filter
Top Products
Filename [HRS9850EU3.fm]
Masterpage:Left
60
EN
Page 60 May 21, 2001 1:38 pm
EDITING (cont.)
Random Assemble
Editing
This function makes it easier to create edited videos when your
recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
connector. You can pre-program up to 8 scenes or “cuts” for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. (
੬
pg. 61)
A
Make connections.
Connect your recorder’s AV1 (L-1) IN/OUT or S-VIDEO
OUT/AUDIO OUT connectors to the video and audio
input connectors on the recording deck, and connect
your recorder’s PAUSE/R.A.EDIT connector to the PAUSE
connector on the recording deck.
● If the recording deck does not have a PAUSE connector,
connect to the R.A.EDIT connector instead.
● The Mini-plug cable is a mono 3.5 mm mini-plug to mono
3.5 mm mini-plug connector.
B
Set the input mode of recording deck.
Insert the cassette to be recorded on into the recording
deck and set the input mode of the recording deck.
C
Load the source cassette.
Insert the source cassette into your recorder.
● Use a source cassette that is recorded in SP or LP mode.
D
Set the edit mode.
See “PICTURE CONTROL” on page 69.
E
Start playback of the source cassette.
Press
4
.
F
Access the R.A.Edit screen.
Press
MENU
to access the Main Menu screen. Press
rt
to move the highlight bar (pointer) to “R.A.EDIT”, then
press
OK
.
● The R.A.Edit screen is superimposed on the video playback in
step
7
.
Your recorder
Player
Audio signal Video signal
Recorder
Mini-plug cable
(not provided)
Another recorder
(with PAUSE connector)
HRS9850EU1.book Page 60 Monday, May 21, 2001 1:44 PM