Filter
Top Products
plug&play setup 11
Check the Results
Make sure that all necessary stations have been stored in the VCR’s memory by
using the ^ and & buttons.
If station names (ID — ੬ pg. 21) have also been stored in the VCR’s memory, the
station name will be displayed on the TV screen.
Finish Off
return to normal screen Press MENU.
The Tuner Set is completed.
IMPORTANT
• re-running setup Plug&Play Setup may not behave as described if it has
already been run on the VCR. This is because some of the information gathered
on the first Plug&Play Setup is retained in memory and that part of the process
may be skipped by the VCR.
•
duplicate stations You may be able to receive the same station from two
different transmitters in which case Plug&Play Setup will detect and store both.
It is normal for one transmitter to give you a better quality picture than the
other; to delete those stations which have a poor picture ੬
Delete A Channel on
page19.
•
manual station setting If any of the above problems occur, refer to
page19 to input station names (੬
Change Station Name). You can also change
station preset positions (੬ pg.20,
Change Station Preset Position).
IF YOU HAVE ANY DIFFICULTY WITH THE ABOVE PROCEDURES CALL THE JVC
CUSTOMER SERVICE HOT LINE ON 0870 330 5000
HR-V505EK-EN/p08-12 2/12/03, 6:32 PM11