Filter
Top Products
advanced features48
Tuner Set
The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the
PR
or
PR
buttons enables you to
jump to the available channels without going via any vacant channels. This channel search
can be done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup or Preset Download has failed to identify and record
available channels or you have moved to a new area.
Auto Channel Setup
get to the main menu Press .
perform auto channel set Move the highlight bar to AUTO CH
SET
using the
PR
and
PR
buttons and press (or E) twice.
rf and scart connection If you have chosen to connect the
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
AUTO SET screen will appear on the TV and remains
there for about 4–12 minutes while the VCR searches for receivable stations. During Auto
Channel Set the
S
mark on the screen moves from left to right.
note: If you have connected both the RF cable and the fully-wired
21-pin SCART cable, and if your TV offers T-V Link, etc., and the
TV is turned on, the VCR automatically performs the Preset
Download (੬ pg. 11) even if you select “Auto’ for Auto Setup
function.
The caption
SCAN COMPLETED appears at the end of the process for
about 5 seconds.
confirmation screen Once Auto Channel Set has completed its search, the confirmation screen
will appear showing the details (
PR = Preset Number, CH =
Channel Number and
ID = Station Name) of the TV stations that
the process has found. The first station will have a highlight bar
over it and will be blinking. This screen and the programme
currently being broadcast on the selected station will alternate at
8second intervals. To view the next channel, press the
PR
and
PR
buttons to move the highlight bar to the required channel.
return to normal screen Press .
NOTES ON CHANNEL RECEPTION
incorrect station id In certain reception conditions, station
names may not be stored correctly by the VCR and Auto Guide Program Number Set may not
work properly. If the Guide Program Numbers are not set, entering a PlusCode number, may
result in an incorrect channel being recorded.
poor reception The VCR memorises all stations found regardless of their quality. If a station’s
quality is poor, you can delete that station from the memory (see page 50).
PR
01
02
03
04
05
06
07
CH
26
33
23
30
37
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
ID
BBC1
BBC2
ITV
CH4
CH5
- - - -
- - - -
PR
08
09
10
11
12
13
14
CH ID
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
[1] a k
[MENU]: EXIT
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
F
AUTO SET
PLEASE WAIT
[MENU]:EXIT
HR-V605/606EK-EN/p48-53 1/25/03, 01:25 PM48