JVC HR-V606EK VCR User Manual


 
advanced features 45
Auto Timer
When the AUTO TIMER is set to ON, the timer is automatically engaged when the VCR power is
turned off and automatically disengaged when the VCR is powered back on.
get to the mode set screen Press . Move the highlight
bar to MODE SET using the
PR
and
PR
buttons and press
(or E).
enable/disable auto timer Select AUTO TIMER using the
PR
and
PR
buttons and press (or E) to toggle between
ON and OFF.
return to normal screen Press .
Auto Power Off/3H
When this function is set to “3H”, the recorder is turned off
automatically if no operation is done within 3 hours. “AUTO
POWER OFF IN 3 MIN” appears on the screen 3 minutes before
the recorder is turned off.
get to the mode set screen Press . Move the highlight
bar to
MODE SET using the
PR
and
PR
buttons and press
(or E).
select auto power mode Move the highlight bar to AUTO
POWER
using the
PR
and
PR
buttons. Press (or E) to
select 3H or OFF.
return to normal screen Press .
Repeat Playback
start repeat playback Press ., then press and hold . again for over 5 seconds, then release.
The Play indicator (
#) will flash on the display panel and the VCR will automatically playback
and rewind the tape 100 times and then stop.
stop playback Pressing S, ., < or > stops repeat playback.
Next Function Memory
play To playback immediately after rewinding, press < and then . within 2seconds.
power off To power off the VCR immediately after rewinding, press < and then o
within 2seconds.
timer standby To put the VCR in timer standby mode immediately after rewinding, press
< and then c within 2seconds.
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER ON
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
AUTO POWER OFF OFF
F
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMERER ON
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
AUTO POWER OFF 3H
F
HR-V605/606EK-EN/p43-47 1/25/03, 01:24 PM45