Filter
Top Products
equipment key 7
FRONT PANEL
1 STANDBY/ON o Button
turns VCR on/off (loading a
cassette also turns power on).
2 Cassette Loading Slot is
where cassette is inserted;
door closes.
3 PR+/- Buttons select a
preset position.
4 Display Panel provides
clear view of various displays
and indicators.
5 Infrared Beam Receiving
Window is where Remote
Control should be aimed when
in use.
6 < Button rewinds
the tape; initiates reverse
picture search.
7 > Button fast-
forwards tape; initiates
forward picture search.
8 T Button starts regular
recording (press once), Instant
Timer Recording (press twice);
sets duration of ITR.
9 | Button stops tape
temporarily during recording;
stops tape temporarily during
playback; plays back frame by
frame with each additional
press.
SATc Button enables/
disables the Auto Satellite
Programme Recording mode.
10
§ Button stops tape;
ejects tape during Stop mode.
11 . Button plays back tape;
cancels Pause, Still, Slow,
Search modes.
REAR PANEL
1 Mains Power Cord
supplies power to VCR.
2 SAT CONTROL Connector
enables connection of the
Satellite Controller for timer
recording with a satellite
receiver.
3 ANT. IN Connector enables
connection of aerial.
4 L-2 IN/DECODER
Connector enables connection
of satellite receiver or second
recorder.
* DECODER function is not available in the
UK.
Diagram Key
6 AUDIO OUT (L/R)
Connectors enable connection
of audio cassette recorder, TV
or second VCR for dubbing.
7 RF. OUT Connector enables
connection to aerial terminal
of TV receiver.
VCR DISPLAY PANEL
1 c Indicator lights when
the c button has been
pressed to engage Timer
mode.
2 Play Indicator lights up
during playback; blinks during
Repeat Playback or when
using Next Function Memory
for playback.
3 Record Indicator lights up
during recording; blinks
during Instant Timer
Recording.
4 Channel Display shows
preset position where the
station currently being
received is stored.
Mode shows external input
mode selected (L-1 or L-2).
Clock Display shows
current time.
Preset Position* (or Mode)
and Clock Display appear
alternately when b is
pressed.
* Preset Position (or Mode) is
not displayed during playback.
5 REVIEW Indicator blinks
after timer-recording and
shows how many programmes
have been timer-recorded.
6 SATc Indicator lights up
during Auto Satellite
Programme Recording
standby mode; blinks when
Auto Satellite Programme
Recording is in progress.
7 VCR Indicator lights when
the VCR is in the video mode.
At this point, the TV automati-
cally enters AV mode.
5 L-1 IN/OUT Connector
enables AV connection to TV
or second VCR.
19 TV
Button switches TV
input terminal.
20 STANDBY/ON o Button
— same as button on VCR.
21 Number Keys are used in
preset position selection and
the VIDEO Plus+ Timer
Programming.
22 DATE + / – Buttons input
date of programme for timer
recording.
23 DAILY Button enables
timer recording of daily
serials.
24 WEEKLY Button enables
timer recording of weekly
serials.
25 AUX Button selects VCR’s
auxiliary input mode.
26 c Button engages timer-
standby mode.
27 b(Display) Button
switches display between
clock time and Preset
Position* (or Mode).
Preset Position (or Mode) is not
displayed during playback.
28 TV/VCR Button switches
connected TV’s mode between
TV and AV.
29 MENU Button accesses
Menu screen.
30 PR Buttons are used
for selection in on-screen
menus.
PR + / – Buttons select a
preset position.
31 3 Button
initiates a 30-second period of
fast-motion playback.
32 . Button — same as
button on VCR.
33 > Button fast-
forwards tape; inltiates
forward picture search.
34 | Button — same as
button on VCR.
35 TV
+/– Buttons control
volume of connected JVC TV.
36 TV STANDBY/ON o
Button turns TV on/off.
REMOTE CONTROL
1 Button ejects tape
during stop mode.
2
STARTSTART
STARTSTART
START + / – Buttons
access Regular Program
screen; input programme
Start Time.
3
STOPSTOP
STOPSTOP
STOP + / – Buttons input
programme Stop Time.
4 PDC Button enables/
disables PDC recording.
* VPS (Video Programme
System) recording is not currently
available in the U.K. and not
possible with this VCR.
5 x Button cancels timer-
programme.
0000 Button resets
counter on the on-screen
display to ‘0:00:00’.
6 Auto Tracking Button
enables/disables auto
tracking mode during
playback.
/ Button selects tape.
7 AUDIO Button changes
output sound mode.
8 PROG Button accesses
Timer Programming Set
screen.
9 OK Button enters
selections made in on-screen
menus.
10 Buttons initiate
functions such as frame by
frame playback and variable
speed search.
11 C Button accesses
Program screens/displays to
check the programme that you
have programmed (next
programme’s information
screen appears each time
button is pressed).
12 Buttons initiate
index function.
13 < Button rewinds
the tape; inltiates reverse
picture search.
14 S Button stops tape.
15 T Button starts regular
recording (press . the same
time)
16
Button shows current
VCR status on the TV screen
if O.S.D is set to ON.
17 TV PR +/– Buttons select
the connected JVC TV's
channel.
18 rButton
‘reviews’ timer-recorded
programme.
/
/
HR-V615/616/617EK-EN/p02-07 3/12/04, 10:20 AM7
Black