Filter
Top Products
20 EN
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
%
NOTE:
Select EDIT when you are dubbing tapes. Refer to page 39.
PLAYBACK AND RECORDING FEATURES (cont.)
%
123
456
7
89
0
2
4
1
3
MENU
OK
SHUTTLE PLUS
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5
∞
or SHUTTLE PLUS%
fi
, then press OK
or SHUTTLE PLUS .
SELECT PICTURE CONTROL
SET MODE
3
Move the highlight bar (arrow) to "PICTURE CON-
TROL" by pressing CH 5
∞
or SHUTTLE PLUS %
fi
,
then press OK or SHUTTLE PLUS to select the
desired mode.
AUTO*:Normally select AUTO.
It automatically adjust the picture quality.
* When VIDEO CALIBRATION is set to OFF
(੬ pg. 26), you can only select NORM
instead of AUTO.
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTE:
• When you select EDIT, SHARP or SOFT, the
selected mode will not change until you select again.
• When you select EDIT to dub tapes, be sure to
select AUTO (or NORM when VIDEO CALIBRATION
is set to OFF) after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
FUNCTION
VIDEO CALIBRATION ON
=PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
HR-VP473U
FUNCTION
VIDEO CALIBRATION ON
=PICTURE CONTROL AUTO
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
HR-VP673U
OK
MENU
[VP673U]
OK
MENU
[VP473U]
CH
CH