Filter
Top Products
26
EN
TIMER RECORDING (cont.)
VCR Plus+
Setup
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
IMPORTANT
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong
VCR CH number will be displayed on the
Program screen (੬ step 5 on page 25). When this
happens, perform the following steps to set the correct
guide channel number for that station.
To ensure that VCR Plus+ timer recording operates
correctly, it is necessary to set the VCR Plus+ “Guide
Channel Set” for each station. Read the following
information carefully.
VCR Plus+ guide channel matching
The VCR Plus+ programing system assigns a VCR Plus+
guide channel to the TV channels and the cable
channels. These guide channel numbers are also called
the VCR Plus+ channel codes. Most TV listings have a
section, usually a chart, indicating the guide channel
numbers assigned to each station. For accurate VCR
Plus+ programing, the VCR Plus+ guide channel number
for each station should match the channel number on
which it is received in your area.
NOTES:
●
In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your VCR or cable box.
Check your TV listing, or contact your cable supplier for
details.
●
Many TV stations can be viewed on cable. Check your TV
listing, or contact your cable supplier for details.
123
456
7
89
0
2
4
1
3
2 – 5
2 – 5
1 6
4 5
SPEP
VCR
1 6
2 – 5
2 – 5