Filter
Top Products
38 EN
VCR Plus+
Timer
Programming
● Before VCR Plus+ Timer programming, see "VCR Plus+
Setup" on page 18.
● Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
Timer recording allows you to program the VCR to
automatically record a program which will be broadcast at
some future time.
The timer record function can be programmed using VCR Plus+
or On-Screen Timer Programming. (੬ pg. 38 or 40)
TIMER RECORDING
LOAD A CASSETTE
1
Make sure the record safety tab is present.
● The VCR’s power comes on automatically.
ACCESS VCR PLUS+ SCREEN
2
Press MENU on the remote
control.
● The clock must be set in
order to access the VCR
Plus+ screen. If you
haven’t set the clock, the
Main Menu screen
appears when you press
MENU. Refer to page 7
for the Plug & Play procedure or page 9 for the clock
setting procedure.
ENTER PLUSCODE NUMBER
3
Press the appropriate NUMBER keys to enter the
PlusCode number printed in the TV listings for the TV
program you wish to record.
● To make corrections, press CANCEL and input the
correct PlusCode number.
● If the PlusCode number you input is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the VCR Plus+
screen reappears (step 2).
CHECK INPUT DATA
4
Press OK and the Program
screen appears.
The PlusCode number you
entered appears in the
Program screen. Check to
make sure it’s accurate.
● To timer-record daily or
weekly serials, press
DAILY (NUMBER “8”) or
WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY”
appears on the Program screen. Pressing the button
again makes each corresponding display disappear.
● If you made a mistake, press CANCEL and, after
pressing MENU as many times as necessary to access
the VCR Plus+ screen, input the correct PlusCode
number.
SET TAPE SPEED
5
Press SP/EP.
2
2
q
5
/
8
6
12
45
3
6
8
0
7
9
NUMBER
NUMBER "9"
NUMBER "8"
CANCEL
SP/EP
OK
MENU
PROGRAM 1
(VCR PLUS+ 12345678)
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 40 SP
PRESS (8=DAILY, 9=WEEKLY
SP/EP=REC SPEED)
PRESS (MENU) TO END
VCR PLUS+
PRESS NUMBER KEY (0-9)
PRESS (MENU) TO MAIN MENU