Filter
Top Products
15
ATS Automatic Tuning System and Auto Time/Date Setting
This VCR has a built-in TV receiver
module. Before you can record a TV
program, all the available TV stations
must be tuned in and preset in the
memory. The ATS function (Automatic
Tuning System) allows all the locally
available TV stations to be automati-
cally stored and sorted according to
the currently effective national station
list. To accomplish this, ATS will need
about 12 minutes. During this period
of time the VCR cannot be used. If you
wish to change the station sequence,
you can later perform a removing
procedure (see page 17).
Preparation:
• Press the
button to turn on the DVD/VCR.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light)
1
Press SET UP MENU. Press
or repeatedly until the dot
before ATS (AUTO TUNING
SYSTEM) blinks. Then press OK.
If no channel setting is done:
Press 1 of number keys at first, and then press SET UP MENU.
2
Press / or / to select
the desired country. Then press
the OK.
3
The ATS setting is completed when “CHANNEL MAPPING”
indication and the current time display appears.
Press SET UP MENU repeatedly until the TV program will be
displayed.
If the CLOCK SET-menu appears and 00:00 appears in the display,
please set the clock manually. In this case, no station transmitting
time data can be received (see page 19).
Note: If ATS is done under the bad receiving condition, one or more
stations may not be found. In this case, set these stations
manually.(see page 20)
TIMER REC SET
VCR EXTENSION
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER
:OK
MENU
EXIT
:
VCR SETUP
ATS (AUTO TUNING SYSTEM)
ATS (AUTO TUNING SYSTEM)
AREA
GERMANY
HOLLAND
AUSTRIA
DENMARK
ITALY
SWISS
SELECT :
OK : OK
MENU
EXIT :
ATS ACTIVE
CHANNEL MAPPING
SELECT
:
SKIP
: CANCEL
CHANGE NAME
:1
MOVE : 2
EXIT
: MENU
1
2 6
9
12
3
4
ARD
HR3
WDR3
MDR3
TM3
ZDF
RTL
SAT1
PRO 7
BR3
SW3
N3
5
7
8
10
11
VCR
2A73501AE(12-15) 4/17/02, 8:22 PM15