JVC HR-XV1EU DVD VCR Combo User Manual


 
21
Manual TV station presetting
The Fine Tuning adjustment
Under a normal receiving condition, the
station-search will stops automatically at the
best receiving position. That picture will
appear without disturbance.
This receiving position will be memorized
automatically. The Fine Tuning can not be
memorized additionally.
In rare case of bad receiving condition, the
station-search might not stop at the best
receiving position. That picture will appear
with disturbance, e.g. waving lines.
Only in this rare case, use the Fine Tuning to
tune the concerned station manually and
exactly.
In step 5, press or until the station is
adjusted to best position. Then press OK.
5
Please wait until OK: ENTER
appears. It may take a few
seconds.
Then press OK.
In the next step, the program
position on which this station
should be stored will be set.
6
Press or repeatedly until
"5" displayed.
Or enter 5 with number keys.
Then press OK.
7
Repeat the steps 3 and 6 to preset other TV stations.
8
Press SET UP MENU repeatedly until the TV picture appears
on the screen.
VPS CH 1
SAT1
OK
OK
:
MENU
DEC OFF
SELECT :
/ F. TUNE :
EXIT :
VPS CH 5
SAT1
OK
OK :
MENU
DEC OFF
CH
/ 09
:
EXIT :
To skip a channel position
Unwanted channels can be skipped so that they cannot be called
up by pressing PR. Select the channel to be skipped...
....e.g. channel 29.
Select channel 29, then press CANCEL.
This channels number will be flashing. That way you can cancel
further channels one after the other.
To cancel the channel skipping
Select the skipped channel using number keys, then press
CANCEL. The channel No. does not blink any longer, and the
channel No. now may be selected again using PR.
Note:
Even the skipped program position can be
called up with number keys.
CH 29
VPS
SWF
VCR
2A73501AE(16-21) 4/17/02, 8:26 PM21