Filter
Top Products
Before Operation - VCR part
14
Setting the clock Manually
The clock in your VCR controls time and date
settings for your VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a Teletext
signal. If the broadcast signal is weak the clock
will not be set and will require setting manually.
11
Press MENU.
Press 1 or 2 to select TIME DATE.
Press OK.
The auto adjust mode can be set to “OFF” by pressing
D or E if you want to set the time manually.
Press OK.
22
Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
33
If you make a mistake press 1 or 2 and enter the
correct details.
44
Press MENU.
To set the colour system
11
Press MENU.
22
The main menu will appear on the TV screen.
33
Press 1 or 2 to select the SYSTEM and press OK.
44
Press 3 or 4 to select according to the COLOUR
system used.
55
Press MENU to remove the menus from the TV
screen.
HH MM DD MM YY
:..- -
- -
- - - -
- - - - -
i
12
TIME
DATE
REC
i
Pr-12
ACMS
P
SET
R
12
TIME
DATE
SYS-
TEM
SYS-
TEM
AB
C
OSD
OSD
ON
OFF
OSD
f
16:9
4:3
EPC
DECO-
DER
+
-
NIC
STB
THR-
OUGH
AUTO
PAL
MESECAM
HH MM DD MM YY
:..00 1 01 03 WED
i
12
TIME
DATE
8
AUTO ADJUST
- -
i
12
TIME
DATE
ON:
OK