JVC HR-XV2E DVD VCR Combo User Manual


 
33
OPERATION
Additional Operation - VCR part
On Screen Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
11
Press DISPLAY to display.
Press DISPLAY repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
22
After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press DISPLAY again to remove all displays from
the TV screen.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the display
window instead of the time by pressing DISPLAY on the
remote control. The Digital Tape Counter indicates the
relative positions of recordings on the tape.
11
Press DISPLAY.
Press 0000 to set the counter to 0:00:00.
Press PLAY
22
or start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
22
Press
99
when playback or recording is complete.
Press
m.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Child Lock
The control buttons on the front of the VCR can be
switched off so that your VCR can only be operated
using the remote control.
11
Press .
SAFE will flicker in the display window for a few
seconds.
None of the buttons on the front of your DVD+VCR
will work (except
ÁÁ
and ).
If any buttons on the front of your unit are pressed
SAFE will flicker in the display window for a few
seconds.
22
Press again to switch off the child lock.
OFF
will flicker in the display window for a few
seconds.