JVC HR-XVC11BJ DVD Player User Manual


 
26
Playing an Audio CD
This unit can play Audio CDs.
Audio CD
Once you insert an Audio CD, a menu appears on
the TV screen.
Press v / V to select a track/file then press N
(PLAY) or ENTER (OK) and playback starts. You can
use variable playback functions. Refer to page 24-25.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
1. Insert an Audio CD recorded media.
AUDIO CD menu appears.
2. Press PROGRAM and the mark will appear.
Note:
Press PROGRAM again to exit the program edit
mode, then the mark will disappear.
3. Select a track on the “List”, then press ENTER
(OK) to place the selected track on the “Program”
list. Repeat to place additional tracks on the list.
4. Select the track you want to start playing on the
“Program” list.
5. Press N (PLAY) or ENTER (OK) to start.
Playback begins in the order in which you pro-
grammed the tracks. Playback stops after all of
the tracks on the “Program” list have played once.
6. To resume normal playback from programmed
playback, select a track on the list and then press
N (PLAY).
Repeat Programmed Tracks
Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Note:
If you press > once during Repeat Track playback,
the repeat playback cancels.
Erasing a Track from “Program” List
1. During STOP mode, press PROGRAM and
the mark will appear.
2. Use vVb Bto select the track that you wish to
erase from the Program list.
3. Press CLEAR (0000). Repeat step 1~3 to erase
additional tracks on the list.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
the mark will appear.
2. Use vVb Bto select “Clear All”, then press
ENTER (OK).
Note:
The programs are also cleared when the power is off
or the disc is removed.
E
E
E
E