Filter
Top Products
28
PICTURE menu
HV-32/28P40BJ / LCT1687-001A-U / English
3 Press the 6 buttons to choose
the appropriate colour system.
Then press the a button
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system
from the input signal. You can only use
this when you are viewing a picture from
programme number PR 0 (AV), or an
EXT terminal.
• The AUTO function may not function
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
function, choose another colour system
manually.
• When in the Programme numbers PR 0
(AV) to PR 99, you cannot choose NTSC
3.58 or NTSC 4.43.
SECAM can be chosen when the
COUNTRY setting is IRELAND.
• COLOUR SYSTEM cannot be chosen
when you are watching the EXT-4 picture.
4:3 AUTO ASPECT
You can choose one of three ZOOM modes,
REGULAR, PANORAMIC or 14:9 ZOOM,
as the ZOOM mode for the normal picture
(4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then
press the a button
2 Press the 6 buttons to choose a
ZOOM mode
D0017-EN
>> 4:3 AUTO ASPECT
OK
PANORAMIC
REGULAR
14:9 ZOOM
HV-32&28P40BJ_Eng.book Page 28 Thursday, July 29, 2004 9:25 AM