Filter
Top Products
38
SET UP menu
HV-32/28P40BJ / LCT1687-001A-U / English
6 Turn on the VCR, and then press
the a button to transmit the data
to VCR
The T-V LINK menu disappears once the
data transmission ends.
If the DECODER (EXT-2) function has
been set to “ON” but the TV channel
cannot be unscrambled, check the
following:
• Has the decoder been connected to the
VCR properly according to the VCR
and decoder instruction manuals?
• Has the decoder power been turned
on?
• Can the TV channel be unscrambled
with a decoder?
• Do you need to change the VCR
settings in order to connect the
decoder? Confirm that the VCR is set
properly by rechecking the VCR
instruction manual.
COMPONENT AUTO SELECT
When an external device that can output a
component signal is connected to the EXT-4
component terminal and is played back, the
TV input is automatically changed to EXT-4.
ON:
When the device connected to EXT-4 is
played back, the TV input is automatically
changed to EXT-4.
OFF:
Even when the device connected to EXT-4 is
played back, the TV input is not changed.
(Set to OFF when shipped from the factory.)
• This function automatically changes the
TV input to EXT-4 when the TV detects a
component input signal from the device
connected to EXT-4.
• When set to ON, the TV input may be
automatically changed to EXT-4 just by
turning the power on, removing a disc, or
another operation with a device such as a
DVD player.
HV-32&28P40BJ_Eng.book Page 38 Thursday, July 29, 2004 9:25 AM