Filter
Top Products
No. 52012
HV-29LP
Z
29
Item
Measuring
instrument
Test point Adjustment part Description
Adjustment of
H. CENTER
Signal
generator
Remote
control unit
3 .H-CE NT. 13. Receive a circle pattern signal.
14. Select 3.H-CENT and set the initial sett ing value.
15. Adjust H-CENT to make C=D.
16. Press the MENU/OK key and memorize the set value.
Ad justment
of H.SIZE
4.H-SIZE 17. Receive a cross-hatch signal.
18. Select 4.H-SIZE and set the initial setting value.
19. Adjust H-SIZE and make sure that the horizontal sc reen size
of the picture size is in the bellow table.
20. Press the MENU/OK key and memorize the set value.
21. Input a NTSC VIDEO signal (60Hz) from the EXT terminal, and
make sure that the horizontal screen size is in the below table.
22. Press the MENU/OK key and memorize the set value.
Ad justment
of EW-PIN
6.EW-PIN 23. Select 6.EW-PIN and set the initial setting value
24. Adjust EW-PIN and make the 2nd.vertic al lines at the left and
right edges of the screen straight. Also make sure that the 3rd
vertical lines are straight.
25. Press the MENU/OK key and memorize the set value.
CD
Straight
ZOOM
AS PE CT
MODE
ADJ. ITEM
REGULAR ZOOM 16 : 9
H-S IZE 92%
(FIXED) (FIXED)