JVC HV-29VH21 CRT Television User Manual


 
3
HV-34LH21/34LH51/34LH71/29WH21/29WH51/29WH71/29VH21 / GGT0020-001A-H / English
Setting up your TV
CAUTION
Turn off all the equipment including the
TV before connecting anything.
1 Connecting the aerial and VCR
Aerial cable is not supplied. Use a
good quality 75-ohm coaxial cable.
Read the manual that came with the
VCR before connecting.
If not connecting a VCR (see Fig. A):
Connect an aerial cable to the aerial socket
on this TV.
If connecting a VCR (see Fig. B):
1 Connect the aerial cable to the aerial
input socket on the VCR, and connect
the VCR and TV with another aerial
cable.
2 Connect the VCR’s VIDEO OUT (video
output) jack and the TV’s VIDEO jack
with a video cable.
To connect a VCR to the TV with an S-
VIDEO cable:
Connect the VCR’s S-VIDEO OUT (S-
VIDEO output) connector and TV’s S
connector with an S-VIDEO cable A,
instead of connecting with a video cable.
3 Connect the VCR’s VIDEO OUT (audio
L/R output) jacks and the TV’s AUDIO
jacks (L/MONO and R) with an audio
cable.
If the VCR’s audio output is in mono,
connect the VCR’s AUDIO OUT (audio
output) jack and the TV’s AUDIO L/
MONO jack with an audio cable.
R
RL
L/MONO
AUDIO
AUDIO
L/MONOR AUDIO
C
R
C Y/VIDEO
B
VIDEO
VIDEO-2
VIDEO
OVER
S
VIDEO-3/
COMPONENT
VIDEO-1
OUTPUT
R
RL
L/MONO
AUDIO
AUDIO
L/MONOR AUDIO
C
R
C Y/VIDEO
B
VIDEO
VIDEO-2
VIDEO
OVER
S
VIDEO-3/
COMPONENT
VIDEO-1
OUTPUT
A
Back of the TV
Fig. A
Back of the TV
Fig. B
HV-34LH&29WH_Eng.book.fm Page 3 Monday, September 1, 2003 7:59 PM