Filter
Top Products
38
SET UP menu
HV-32/28P40BU / LCT1684-001A-U / English
4 Press the 5 buttons to choose
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
5 Press the a button to complete
the setting
The T-V LINK menu appears.
You can send the programme numbers
data to a VCR with the T-V LINK
function.
6 Turn on the VCR, and then press
the a button to transmit the data
to VCR
The T-V LINK menu disappears once the
data transmission ends.
If the DECODER (EXT-2) function has
been set to “ON” but the TV channel
cannot be unscrambled, check the
following:
• Has the decoder been connected to the
VCR properly according to the VCR
and decoder instruction manuals?
• Has the decoder power been turned
on?
• Can the TV channel be unscrambled
with a decoder?
• Do you need to change the VCR
settings in order to connect the
decoder? Confirm that the VCR is set
properly by rechecking the VCR
instruction manual.
COMPONENT AUTO SELECT
When a external device that can output a
component signal is connected to the EXT-4
component terminal and the connected
device is played back, the TV input is
automatically changed to EXT-4.
ON:
When the device connected to EXT-4 is
played back, the TV input is automatically
changed to EXT-4.
OFF:
Even when the device connected to EXT-4 is
played back, the TV input is not changed.
(Set to OFF when shipped from the factory.)
• This function automatically changes the
TV input to EXT-4 when the TV detects a
component input signal from the device
connected to the EXT-4.
• When set to ON, the TV input may be
automatically changed to EXT-4 just by
an operation such as turning the power on,
removing a disc, or another operation
with a device (such as a DVD player).
D0005
DOWNLOAD TV RECORDING DEVICE
T-V LINK
OK
EXIT
-EN
HV-32&28P40BU_Eng.book Page 38 Wednesday, July 21, 2004 5:24 PM