JVC HV-34LZ CRT Television User Manual


 
36
HV-34LZ/29WZ / LCT1202-001A-H / ENGLISH
Troubleshooting
When you are viewing a teletext
programme, you cannot operate the
menus.
Press the TV/VIDEO button to return the
teletext programme to the ordinary TV
programme to try operating the menus.
Is the CHILD LOCK function set to ON?
If the CHILD LOCK function is set to ON,
you cannot operate the TV with the front
control buttons of the TV. Follow the
description "CHILD LOCK" on page 22 to
try to set the CHILD LOCK function to OFF.
If the TV operation becomes disabled
suddenly, press the Main power button
on the TV and turn off the main power.
Try to press the Main power button again
to turn on the main power. If the TV
returns to a normal state, it is not a
failure.
Other concerns
When the SLEEP TIMER function or
AUTO SHUTOFF function operates, the
TV is automatically turned off.
If the TV is turned off suddenly, try to
press the POWER button to turn on the
TV once again. At this time, if the TV
resumes a normal state, there in no
problem.
If you bring a magnetized device such
as a speaker near to your TV, a picture
may be warped or unnatural colours
appear at the corners of the screen.
In this case, keep the device apart from
your TV. If the speaker causes such
phenomena, use the magnetic-shielded
speaker instead.
A picture may be tilted due to the
influence of the earth's magnetism. In
this case, use the "PICTURE TILT" on
page 20 to complete the tilt.
When a white and bright still image (such
as a white dress) is displayed on the
screen, the white part may look as if it
were coloured.
It is a phenomenon unavoidable due to
the nature of the picture tube itself, and
not due to a TV failure.
When the picture disappears from the
screen, the unnatural colours will also
disappear.
When viewing images from commercially
available video software products, or
videos from videotapes which have been
recorded improperly, the top of the
image may be distorted.
This is due to the condition of the video
signal, and not because of malfunction.
Poor sound
Have you adjusted BASS or TREBLE
properly? If not, follow the description
"Adjusting the Sound" on page 21 to try
to adjust them properly.
When the TV channel reception is poor, it
can be hard to hear the stereo or
bilingual sound. In this case, follow the
description "STEREO / I II" on page 21
to hear the sound more easily by
changing it to a mono sound.
Operation disabled
Have the batteries of the remote control
become exhausted?
Follow the description "Putting the
batteries into the remote control" on
page 4 and replace them with new
batteries to try solve the problem.
Have you attempted to use the remote
control at the sides or rear of the TV or at
a location more than seven meters apart
from the TV location? Operate the remote
control in the front of your TV or a
location less than seven meters from
your TV to try to solve the problem.
LCT1202-34LZ_P19-38.p65 5/9/2002, 15:07PM36