JVC HV-Z29V1, HV-Z34L1 CRT Television User Manual


 
21
HV-Z34L1/29V1/ LCT1457-001A / English
Using the TV’s menu
TINT
You can adjust the picture tint.
2 : reddish
3 : greenish
You can change the TINT setting
(picture tint) only when the colour
system is NTSC 3.58 or NTSC 4.43.
To return to the default settings in each
PICTURE MODE:
Press the blue button. This will return the
picture settings in the currently chosen
PICTURE MODE to the default settings,
and stores them in the PICTURE MODE
again.
WHITE BALANCE
You can select one of three WHITE
BALANCE modes (three tones of white) to
adjust the white balance of the picture.
Since white is the colour which is used as a
reference for all the other colours, changing
the WHITE BALANCE mode affects the
appearance of all the other colours on the
screen.
COOL:
A bluish white. Using this mode when
watching bright pictures allows you to enjoy
a more vivid and bright picture.
MID:
The normal white colour.
WARM:
A radish white. Using this mode when
watching films allows you to enjoy colours
that are characteristic of films.
FEATURES menu
Choose FEATURES in the “PICTURE”
menu and press the a or 3 button to
display the sub-menu.
DIGITAL VNR
The DIGITAL VNR function cuts down the
amount of noise in the original picture.
You can choose from the four DIGITAL
VNR function settings of AUTO(LOW),
AUTO(HIGH), MIN and MAX.
AUTO(LOW)/AUTO(HIGH):
The TV will automatically adjust the level of
the DIGITAL VNR effect to match the
amount of noise in the picture, giving you
the best possible picture.
If you set the DIGITAL VNR effect too
high it can make the picture less
sharp. It is recommended to use the
AUTO(LOW) setting if you can. If you
set the DIGITAL VNR function to
AUTO(LOW)but still notice some
noise, change the setting from
AUTO(LOW) to AUTO(HIGH).
MIN:
The level of the DIGITAL VNR effect is set
to the minimum. If you set the DIGITAL
VNR function to AUTO(LOW) but feel that
the sharpness of the original picture has not
been reproduced fully, change the setting
from AUTO(LOW) to MIN.
The MIN setting is not suitable for low-
quality pictures which contain a lot of
noise.
D1015-EN
DIGITAL VNR
Super DigiPure
PULL DOWN
Colour DigiPure
COLOUR SYSTEM
ZOOM
MULTI
AUTO(LOW)
AUTO
AUTO
> FEATURES
ON
OK
HVZ34L1_Z29V1.book Page 21 Friday, November 7, 2003 9:30 AM