JVC AV-27FA44 Flat Panel Television User Manual


 
Button Functions
41
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
RETURN+ and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan through
the channels using the CHANNEL+/– buttons.
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.
Return +
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component, Video-3 or Video-4 (Component) for video devices like VCR’s, DVD players, or
camcorders.
Press the INPUT button
AV-36FA54, AV-32FA54 and AV-27FA54 ONLY
AV-36FA44, AV-32FA44, AV-27FA44, AV-36F704, AV-32F704 and AV-27F704 ONLY
Note:
• You can also access the input menu screen by using the MENU button on the front of the TV
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing MENU
on the front panel and select TV or VIDEO
INPUT by using the CHANNEL +/- buttons (
OPERATE
®
).
   
    
Input


   
    
GJ English 4/24/03, 12:51 PM41