JVC AV 20F704 CRT Television User Manual


 
21
NOTES:
You cannot set the ON/OFF TIMER when the clock is not set.
This TV will automatically turn off approximately 1 hour later after the ON TIMER turns on the TV unless any
buttons are pressed.
To cancel the ON TIMER function:
To cancel ON TIMER in step 7 above press the CH + () or CH – () button to select the “CANCEL” mode.
ON/OFF TIMER
NOTES:
If station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
• To cancel the OFF TIMER function:
To cancel OFF TIMER, in step 7 above press the CH + () or CH – () button to select the “CANCEL” mode.
ON TIMER SETTING
This feature allows you to have the TV automatically turn ON at predetermined time.
If you program the ON timer once the timer will turn ON the TV daily at the same time and to the same channel.
If the power has been turned on at programmed time, the channel is changed to a programmed one.
Press the MENU button.
Press the CH + () or CH – ()
button until the indicator next to
“ON/OFF TIMER” begins to flash,
then press the ENTER button.
Press the CH + () or CH – ()
button until the indicator next to
"ON TIMER" begins to flash, then
press the ENTER button.
Press the CH + () or CH – ()
button to set the hour, then press
the VOL + (
) button.
Press the CH + () or CH –
() button to set the
minute, then press the VOL +
( ) button.
You can change in 10-
minutes step by holding
down the CH + () or CH –
() button.
Press the CH+ () or CH
() button to set the channel,
then press the VOL+ (
)
button.
You can set the channel
which is added in the
CH SET-UP” option.
Press the CH + () or CH –
() button to select the
“SET” mode.
Press the EXIT button.
OFF TIMER SETTING
This feature allows you to have the TV turn “OFF” automatically at a predetermined time.
If you program the OFF TIMER once, The TV will be automatically turned off at the same time daily.
Press the MENU button.
Press the CH + () or CH – ()
button until the indicator next to
“ON/OFF TIMER” begins to flash,
then press the ENTER button.
Press the CH + () or CH – ()
button until the indicator next to
“OFF TIMER” begins to flash,
then press the ENTER button.
Press the CH + () or
CH – () button to set
the hour, then press the
VOL + (
) button.
Press the CH + () or CH –
() button to set the minute
then press the VOL + (
)
button.
You can change in 10-
minutes step by holding
down the CH + () or CH –
() button.
Press the CH + () or CH –
() button to select the “SET”
mode.
Press the EXIT button.
LANGUAGE / IDIOMA / LANGUE
CH SETUP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
/ / ENTER / MENU / EXIT
1
2
3
4
ON/OFF TIMER
ON TIMER
12:00AM CH012
CANCEL
OFF TIMER
12:00AM CANCEL
/ / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
12:00AM CH012
CANCEL
OFF TIMER
12:00AM CANCEL
/ / / / ENTER / MENU / EXIT
5
6
7
8
1
2
3
LANGUAGE / IDIOMA / LANGUE
CH SETUP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
/ / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
7:00AM CH012
CANCEL
OFF TIMER
12:00AM CANCEL
/ / ENTER / MENU / EXIT
4
5
/ / / / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
12:00AM CH012
CANCEL
OFF TIMER
12:00AM CANCEL
6
7
/ / / / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
7:00AM CH012
CANCEL
OFF TIMER
12:00AM CANCEL
ON/OFF TIMER
ON TIMER
7:30AM CH012
CANCEL
OFF TIMER
12:00AM CANCEL
/ / / / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
7:30AM CH007
CANCEL
OFF TIMER
12:00AM CANCEL
/ / / / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
12:00AM CH012
CANCEL
OFF TIMER
11:00PM CANCEL
/ / / / ENTER / MENU / EXIT
ON/OFF TIMER
ON TIMER
12:00AM CH012
CANCEL
OFF TIMER
11:30PM CANCEL
/ / / / ENTER / MENU / EXIT