Filter
Top Products
16
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. This only effects digital channels.
Amplifier
TV Rear Panel
OPTICAL OUT
Digital
Audio
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select "PCM" or "DOLBY DIGITAL" on "Optical
Out" in Sound Adjust. See page 49.
• You can not output audio using the OPTICAL OUTPUT when you have digital sound from an
HDMI device connected to the HDMI 1 or HDMI 2 connection on the back of your TV. (See
page 18).
• Refer to your owners manual on using your amplifier.
Quick Setup
TV
R
ear
P
ane
l
Speaker Speaker
Amplifier
AUDIO OUT
R
L
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
Connecting to an External Amplifier
LCT2034-001A-A English.indd 16LCT2034-001A-A English.indd 16 5/22/06 9:40:44 AM5/22/06 9:40:44 AM