JVC AV 32020 CRT Television User Manual


 
2
8
B U T T O N F U N C T I O N S
ON/MOVE (Picture in Picture)
PIP allows you to view two pictures
simultaneously.
(PIP) ON/MOVE
EXIT to turn PIP off
Note: The PIP channel and main
screen channel will appear in the
display momentarily right after you turn
on PIP. You can leave them up
permanently by pressing DISPLAY until
you reach the mode.
Note: The PIP Screen is 1/9 of the
regular screen size.
Once PIP is turned on, the ON/MOVE
button operates the Move feature.
FREEZE
You can freeze the picture in the main
screen into the PIP window.
FREEZE
Note: When the PIP is off, pressing
FREEZE takes a snapshot of the main
screen and puts it into the PIP
window… great for catching those mail
order addresses.
Note: When the PIP is on FREEZE stops
the PIP picture.
SOURCE
You can select the source for the PIP
window.
SOURCE
SWAP
You can swap the PIP picture and the
main picture.
SWAP
02
07
You can move the PIP window to any of
the TV’s four corners.
ON/MOVE
Note: Each press of the On/MOVE
button will shift the PIP window one
position.
Note: When the PIP screen has no
signal, the PIP window will be blue.
TV V-1 V-2
CHANNEL –/+ For PIP
Change the channel in the PIP window.
CH –/+
PIP NOTES
50 Series models have 2 Tuner PIP and can see
two signals at once. This means you can view two
channels at the same time.
In order for PIP to work, the TV must be set to "TV
mode".
If you use your VCR to play a video, the VCR will
automatically switch your input to VCR mode. In
VCR mode, the TV sees only one signal, that of
the VCR. In order to view PIP, you then need to
press the TV/VCR button on your VCR remote to
switch back to TV mode.
NOTES:
Picture in Picture is
available on the
following models
only:
• AV-36050
• AV-32050
• AV-27050