Filter
Top Products
This feature is used if you have connected an AV Receiver to your television. By turning this
feature on, your television can automatically detect the signal source from your components
that are connected to your AV Receiver.
Press the M
ENU button
π†
To V1 SMART INPUT
è
To turn ON or OFF
Press the MENU button when finished
Notes:
• If you do not have an AV Receiver connected to your
television, turn this feature OFF. By doing so, you can take
advantage of using AV CompuLink components with your television.
• Some AV Receivers may not work with this function.
Initial Setup
41
V1 Smart Input
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
ON
OFF
OFF
NOISE MUTING
FRONT PANEL LOCK
V1 SMART INPUT
POSITION ADJUSTMENT
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the MENU button
π†
To POSITION ADJUSTMENT
è
To enter
π†
è
To adjust the position
Press the MENU button to finish
Notes:
• To reset the adjustment to the center, press the O
K button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s
maximum limit.
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set HD panorama or cinema zoom for 1080i signal.
Position Adjustment
RESET
OPERATE
EXIT
MENUOK
AV-34WP84 English 41 8/5/03, 8:57:04 AM