Filter
Top Products
B U T T O N F U N C T I O N S
2
7
TV/VIDEO
TV/VIDEO controls the TV's input mode.
TV/VIDEO
Model AV-32015 has one Video input.
100 +
The 100+ button lets you access all
channels above Channel 99.
To move to Channel 124:
100+
2 (two)
4 (four)
VCR BUTTONS
RM-C341 and RM-C345 ONLY. This
remote will control your VCR. You can
play, rewind and fast-forward, record,
pause, stop, move channel up and
down, and power on and off.
Note: This remote is preset with the
code 000 to control a JVC VCR. For
any other brand, you must set up the
manufacturer's code (page 12.)
HYPER SURROUND
Create a deep, 3-dimensional sound
effect by channeling the sound through
the TV’s front firing speakers.
HYPER SURROUND
TV VIDEO-1 VIDEO-2
RETURN+
There are two kinds of Return…
R e t u rn+ — Set a “Return Channel” to
re t u rn to after scanning with CH A N N E L - / + .
RETURN+ and hold for 3 seconds
Scan with CHANNEL -/+
RETURN+
Note: To cancel a Return channel, pre s s
and hold Return+ for another 3 seconds
until “RETURN CHANNEL CANCELLED!”
a p p e a r s .
Return — Return to the last channel
viewed after moving to another channel
via the 10 key pad.
RETURN+
Move to another channel with
the 10 key pad.
RETURN+
Note: When PIP is on, the RE T U R N + b u t t o n
function affects only the main screen.
NUMBER BUTTONS
10 KEY PAD
Change channels with the 10 key pad.
For example, to move to Channel 7:
0 (zero)
7 (seven)
MUTING
The MUTING button turns the sound off
completely when you press it. Press it
again to restore the volume to the
previous level.
RETURN CHANNEL
PROGRAMMED !
HYPER SURROUND ON OFF
TV VIDEO
NOTES :
Hyper Surround
and VCR buttons
are available on
the following
models only:
• AV-36050
• AV-36020
• AV-32050
• AV-32020
• AV-27050
You can find
another discussion
of Return and
Return+ on page
11.