Filter
Top Products
Press the
button to move to AUTO TUNER SETUP
¥
To choose CABLE (if you are connected to a cable system) or AIR (if you use an
antenna) or SKIP (if you need to)
To move to START
The Auto Tuner will now memorize all of the clear, active channels your television can
receive. This will take one or two minutes.
12
NOW
PROGRAMMING!
48
Step Three - The Plug In Menu
When you turn your television on for the first time the Plug In Menu will appear. This menu sets
some of the basic settings for your television. A complete description of the Plug In Menu can
be found starting on page 25. We recommend you complete the Plug In Menu items before you
start using your television. But to begin watching your television right away you only need to
run the Auto Tuner Setup. This lets your television learn the channels it is able to receive. To
run the Auto Tuner Setup follow the steps below.
The Auto Tuner is finished when the message PROGRAMMING OVER! appears on screen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
The Quick Setup is complete
STOP
Quick Setup 3