Filter
Top Products
DVD Buttons
VCR Buttons
TV/CATV Switch
VCR/DVD Switch
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to “DVD” to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 22.
Use either the television’s own tuner or a cable box to select channels. Set this switch to “TV”
to operate the television’s built-in tuner. Move the switch to “CATV” to operate a cable box.
• See page 20 for information on programming your remote for cable box operation.
You can control a VCR or DVD player with the buttons on the lower part of the remote control.
Use the “VCR/DVD” selector switch to choose either VCR or DVD operation.
• See pages 21 and 22 for information on programming your remote with VCR and DVD oper-
ating codes.
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to “VCR” to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufac-
turer’s brand VCR, please see the code chart and instructions on page 21.
Button Functions
51