JVC AV 48P775 Projection Television User Manual


 
38
Initial Setup
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen.
The channel cannot be accessed until the correct code
is entered.
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 43.
Channel Guard Message
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings
You can use US V-Chip settings and movie ratings. You may use any or all of the settings (US
V-Chip and Movie ratings). Descriptions for setting each of the three V-Chip formats appear in
the next five pages along with descriptions of the rating categories.
To access the rating categories:
Press the M
ENU button
π
To V-CHIP
®
To operate (Lock icon will appear)
Press ZERO to access the V-Chip menu
®
To turn V-Chip ON or OFF (V-Chip must be
turned ON for rating settings to operate)
π
To move to SET US TV RATINGS and
SET MOVIE RATINGS. (see following pages
for descriptions of each item)
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US rating guidelines. V-Chip has no
effect on video signals from DVD discs or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set
up V-CHIP ratings limits, these programs will not be blocked. See page 39 for information on
how to block unrated programs
V-CHIP
SET US TV RATINGS
SET MOVIE RATINGS
UNRATED
V-CHIP
SELECT OPERATE EXIT
MENU
VIEW
OFF
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
AV-48\56P775\785 38 9/28/04, 11:19:14 AM