JVC AV 48P775 Projection Television User Manual


 
54
Initial Setup
When you are using a surround system, you can substitute the speaker of this television for
the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the
speaker as the center speaker of your surround system. The volume differs when the TV is
being utilized as the Center Channel Input versus when it is not.
Press the MENU button
π
To CENTER CH INPUT
®
To adjust CENTER CH INPUT to ON
or OFF
Press the MENU button when finished
Note:
• In order to use the CENTER CHANNEL SPEAKER feature, you need a video signal present
as well as sound. Because of that we recommend using this feature for Home Theater setup
only. If there is no video signal present, the TV will be muted.
• There are two different volume adjustment levels, one for regular TV and one for TV used as
a CENTER CHANNEL. Please remember that when switching CENTER CHANNEL mode ON
and OFF in TV menu.
Center CH Input
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
SIZE1
DIGITAL
ON
VIDEO-1 MONITOR OUT
OFF
This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,
should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to
"ON".
Press the M
ENU button
π
To VIDEO-1 MONITOR OUT
®
To select ON or OFF
Press the MENU button to finish
Video-1 Monitor Out
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
SIZE1
DIGITAL
ON
VIDEO-1 MONITOR OUT
OFF
AV-48\56P775\785 54 9/28/04, 11:19:23 AM