Filter
Top Products
You can view three separate pictures (still images) on screen on the right side of the TV’s main
picture. The picture of the still image will be renewed in order (from top to bottom).
To change the channel of separate pictures:
• Press the SELECT button and select the separate picture which you want to change. Press
the NUMBER buttons and select the channel.
To display the channel of the separate picture on the full screen:
• Press the SELECT button and select the separate picture which you want to display on the
full screen. Press the OK button.
Notes:
• This function will not work when the picture from all external input is displayed.
• SWAP function will not work.
Cable Box Note:
The 2–Tuner Multi Screen function may not operate when used with certain cable boxes. This
is because while some models of cable boxes may receive up to 181 channels, and may
only send the signal from one channel to your television. (Please refer to diagram on page
12). For the 2–Tuner Multi screen function to operate correctly, it must have access to all
available channels. Since the television is receiving the signal from only one channel from the
cable box, it is impossible for the 2–Tuner Multi screen function to display a second, different
channel. Because there are many different models of cable boxes in use today, if you are
having problems operating your 2–Tuner Multi screen function feature with your cable box, we
recommend you contact your local cable company for connection advice.
MAIN PICTURE
SEPARATE PICTURES
Button Functions
49
This allows you to quickly look at up to 12 channels at a time so that you can decide which
one to watch.
Notes:
• Only RF input signal will be displayed.
• You can watch the channel added in channel summary. See page 28.
Index
POP
65,56,48WP74 English OK1 2/18/03, 1:47 PM49