Filter
Top Products
EN 37
Edit To
Another VCR
You can use your VCR as the player and another VCR as the
recorder.
EDITING
Player Your VCR
VIDEO IN
AUDIO IN
Recorder Another VCR
[A35U]
[A55U]
AUDIO OUT
VIDEO OUT
Audio/Video cable
(not supplied)
Another VCR
Player Your VCR
Recorder
VIDEO IN
AUDIO IN
MAKE CONNECTIONS
1
Connect an AV cable between your VCR’s VIDEO OUT
and AUDIO OUT connectors and another VCR’s
VIDEO IN and AUDIO IN connectors.
For HR-A55U owners...
● When connecting to a monaural VCR, connect your
VCR’s AUDIO OUT L connector to the AUDIO IN
connector on the monaural VCR.
For HR-A35U owners...
● When connecting to a Hi-Fi VCR, connect your
VCR’s AUDIO OUT connector to the AUDIO IN L
connector on the Hi-Fi VCR.
LOAD CASSETTES
2
Insert the playback cassette into your VCR and the
cassette to be recorded on into the other VCR.
SET RECORDER’S INPUT
MODE
3
Set the other VCR's auxiliary (AV) input mode.
SELECT “EDIT” FOR PIC-
TURE CONTROL SET MODE
4
Follow the “Picture Control” section on page 21, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
AUTO or (NORM when AUTO PICTURE is set to OFF)
after you finish dubbing the tapes.
START PLAYER
5
Set to its play mode.
NOTE:
If the player is equipped with a superimpose/OSD
disable feature then set "SUPERIMPOSE" to OFF before
pressing PLAY (
੬
pg. 24).
START RECORDER
6
Set to its record mode.
VIDEO OUT
AUDIO OUT
Audio/Video cable
(not supplied)