JVC HR-DD750U VCR User Manual


 
24 EN
PLAYBACK AND RECORDING FEATURES
Playback
Features
123
456
7
89
0
2
4
1
3
PAUSE
CH
CH
SKIP SEARCH
REVIEW
PLAY
REW
FF
PAUSE
REW
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the CH
5
(+) or
() button to correct the picture.
During still picture, the normal (mono) sound from
the previous 3 seconds (approx.) will be played back
repeatedly (provided there was at least 6 seconds of
normal playback prior to engaging the still picture
mode).
"TIMESCAN AUDIO" must be set to "ON", or the
sound will not be heard ( pg. 35).
ACTIVATE FRAME-BY-
FRAME PLAYBACK
2
Press PAUSE repeatedly to advance one frame at a time.
OR
Press TIME SCAN £ repeatedly for forward frame-by-
frame playback or TIME SCAN repeatedly for
reverse frame-by-frame playback.
To resume normal playback, press PLAY.
Slow Motion/Reverse Slow
Motion/Reverse Motion
Playback
ACTIVATE SLOW-MOTION
PLAYBACK
1
For hands-free slow-motion, press TIME SCAN
during playback to decrease speed in the forward
direction. Continue to press TIME SCAN to select
the reverse slow motion, reverse play and reverse
search modes.
OR
During still picture, press and hold TIME SCAN £ for
forward slow motion, or press and hold TIME SCAN
for reverse slow motion. Release to return to still picture.
To resume normal playback, press PLAY.
Refer to the chart on page 35 for the Play, Slow Motion and
Search speeds that are selected using the TIME SCAN buttons.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback resumes.
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, press FF for forward high-speed
search, or REW for reverse high-speed search.
The search speed is 7 times normal playback speed with
SP recordings, and 21 times normal with EP recordings.
TimeScan will be automatically engaged during high-
speed search with an SP-recorded tape.
If the tape speed changes from SP to EP during high-
speed search the TimeScan mode will change to EP
search mode.
Press TIME SCAN for the opposite direction during
high-speed search of an EP-recorded tape to change
to 7x TimeScan search. ( pg. 34)
To resume normal playback, press PLAY.
High-Speed Search
PLAY
TIME SCAN
REVIEW
FF
TIME SCAN