JVC HR-DD750U VCR User Manual


 
EN 35
Speed
Names of
special-effects
playback
Reverse Forward
Search Play Slow-Motion *Still Slow-Motion Play Search
-7x -5x -3x -1x -1/6x -1/18x 0 1/18x 1/6x 1x 2x 3x 5x 7x
Audio is output.
Audio is Audio is Audio is not
Audio is output.
not output. output. output.
TimeScan
Audio output
* Still mode cannot be engaged using the TIME SCAN buttons. Still mode can only be engaged by pressing
the PAUSE button.
The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.
The TimeScan search speed is the same for SP and EP recordings.
To resume normal playback, press PLAY.
Picture may be distorted at the position where the recording speed is switched.
The picture may be noisy for a moment when you change the playback speed.
During high-speed search with a tape containing both SP and EP recordings, the search speed will change automatically to 7x
normal playback speed with TimeScan when the recording tape speed switches from EP to SP.
Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
Picture may appear distorted in comparison to normal playback.
In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
TimeScan sound quality will differ in comparison to normal playback.
When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x
normal speed, the audio playback may be faster than normal.
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF".
TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. *The default setting is "ON".
1 Press MENU to access the Main Menu screen.
2 Move the highlight bar (arrow) to "FUNCTION SET" by press-
ing CH5∞ or TIME SCAN%fi, then press OK or TIME SCAN
.
3 Move the highlight bar (arrow) to "TIMESCAN AUDIO" by
pressing CH5∞ or TIME SCAN %fi, then press OK or TIME
SCAN to select to "ON" or "OFF".
4 Press MENU to return to the normal screen.
%
FUNCTION
=AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
AV COMPU-LINK ON
VIDEO CALIBRATION ON
=TIMESCAN AUDIO ON
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
%